The cylinder of small concrete mixer truck is a component that forms the working volume with the piston. The function of the cylinder is to convert the pressure energy of compressed air into mechanical energy, and the driving mechanism makes linear reciprocating motion, swing and rotation motion. So, how to prevent the cylinder of small concrete mixer from cracking? Let's introduce:

导致小型混凝土搅拌车气缸破裂的因素很多，要预防气缸破裂，应该做到：发动机温度过高时，须等发动机温度降低后，再加水发动；不得先启动发动机，后加冷.却水，以免使气缸崩裂；在严寒条件下车，须放净冷.却水，启动车时加热水启动；冬季停车若时间较长，又不能放水时，可间歇发动车辆，保持发动机有一定温度而不致于结冰，不得用喷灯或明火直接烤车，同时使用的冷.却水要洁净。

There are many factors leading to the cylinder rupture of small concrete mixer truck. To prevent the cylinder rupture, we should do: when the engine temperature is too high, we must wait until the engine temperature decreases, and then add water to start; Do not start the engine after it is cold Drain the water to avoid cracking the cylinder; When getting off in severe cold conditions, you must let it cool When the vehicle is started, the water is heated; If the parking time in winter is long and the water cannot be drained, the vehicle can be started intermittently to keep the engine at a certain temperature without freezing. It is not allowed to bake the vehicle directly with blowtorch or open fire. At the same time, it is cold But the water must be clean.

小型混凝土搅拌车如果气缸套出现破损，发动机在进气行程时会吸入冷.却液，而在压缩行程和做功行程时高压气体又会从破损处进入冷.却水道。无论出现哪一种情况，都将妨碍可燃混合气的形成和燃烧，甚使发动机不正常工作，将严重影响发动机的使用寿命。

If the cylinder liner of a small concrete mixer is damaged, the engine will absorb cold air during the intake stroke In the compression stroke and work stroke, the high-pressure gas will enter the cold from the damaged place But the waterway. No matter what happens, it will hinder the formation and combustion of combustible mixture, and even make the engine work abnormally, which will seriously affect the service life of the engine.

以上就是为大家介绍的有关自动上料搅拌车的详细的介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务/

The above is a detailed introduction to the automatic feeding mixer truck. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service /