新2手机会员端网址(中国)责任有限公司

新2手机会员端网址
热线电话:400-879-1999 山汽微信
郑重声明 购机 售后
在线询价
热线电话:400-879-1999
您现在所在的位置: 首页> 新闻资讯 > 行业新闻

混凝土自动上料搅拌车进料堵塞了怎么开通?

所属分类:行业新闻 发布时间:2021-03-08 来源: 浏览量:0

1.每天收工时彻底清洗混凝土贮罐及进出料口周围自动,自动上料搅拌车的清洗要点保证不粘有水泥及混凝土结块;
1. At the end of each day, thoroughly clean the concrete storage tank and the area around the inlet and outlet. The cleaning points of the automatic feeding mixer should ensure that there is no cement and concrete caking;
2.每次装料前用水冲洗进料口,使进料口在装料时保持湿润;
2. Flush the inlet with water before each loading to keep the inlet moist during loading;
3.在装料的同时向随车自带的清洗用水水箱中注满水;
3. At the same time of loading, fill the cleaning water tank with water;
4.装料后冲洗进料口,洗净进料口附近残留的混凝土;
4. Wash the inlet after loading and clean the residual concrete near the inlet;
5.到工地卸料后,冲洗出料槽,然后向混凝土贮罐内加清洗用水30—40 L;在车辆回程时保持混凝土贮罐正向慢速转动;
新2最新管理手机网址
5. After unloading at the construction site, wash the discharge chute, and then add 30-40 l of cleaning water to the concrete storage tank; keep the concrete storage tank moving forward and slowly when the vehicle returns;
6.下次装料前切记放掉混凝土贮罐内的污水。
6. Remember to discharge the sewage in the concrete storage tank before the next loading.
7.搅拌车进料口给料量是否合理:正确的方式是物料在吸料口和空气形成一定的气物混合比,在气流的推动下均匀流入上料机。这个时候我们需要将料枪设计带有补气功能。如果物料积压时间过长可能很硬,这个时候需要在料枪上装一个振荡器,敲碎结块的物料。
7. Whether the feeding amount at the feeding port of the mixer is reasonable: the correct way is to form a certain gas-solid mixture ratio between the material at the suction port and the air, and flow into the feeder evenly under the push of the air flow. At this time, we need to design the material gun with air supply function. If the material overstocking time is too long, it may be very hard. At this time, an oscillator needs to be installed on the material gun to break the caked material.
今天是小编给大家介绍的新2最新管理手机网址内容,更多的精彩内容请详细的关注我们的网站: ,后续内容我们会定期的进行更新!
Today is Xiaobian's introduction to the automatic feeding mixer. Please pay more attention to our website:   We will update the follow-up content regularly!

 

首页 产品 电话 置顶
Baidu
sogou