新2手机会员端网址(中国)责任有限公司

新2手机会员端网址
热线电话:400-879-1999 山汽官方微信
郑重声明 购机 售后
在线询价
热线电话:400-879-1999
您现在所在的位置: 首页> 新闻资讯 > 行业新闻

小型混凝土搅拌车检查规则有哪些?

所属分类:行业新闻 发布时间:2020-10-09 来源: 浏览量:0

  目前混凝土搅拌车是城市建设道路、桥梁、房屋、水利工程、搅拌站等不可或缺的运输工具。小型混凝土搅拌车具有车身窄、轴距短、转弯半径小等个性化设计等特点,对限高、宽、长的工作环境有较强的优势。小型混凝土搅拌车属于工业车辆,做好检查规定是非常要重要的,接下来,我们看看小型混凝土搅拌车需要遵守哪些检查规定。
  At present, the concrete mixer is an indispensable means of transportation for urban construction roads, bridges, houses, water conservancy projects, mixing stations and so on. Small concrete mixer truck has the characteristics of narrow body, short wheelbase, small turning radius and so on. It has a strong advantage in the limited height, wide and long working environment. Small concrete mixer belongs to industrial vehicles, so it is very important to make inspection regulations. Next, let's take a look at what inspection regulations small concrete mixer needs to comply with.
  一、搅拌系统检查规则
  1、 Inspection rules of mixing system
  1、筒体与托轮接触应良好,不应跑偏、窜动和严重变形。
  1. The cylinder should be in good contact with the supporting roller, and should not deviate, move or deform seriously.
  2、搅拌筒机架缓冲件不应有裂纹或损伤;搅拌筒内叶片、进料斗、主辅卸料槽不应严重磨损和变形。
  2. There should be no crack or damage on the buffer part of the mixing drum frame; the blades, feeding hopper and main and auxiliary discharge trough in the mixing drum should not be seriously worn and deformed.
  3、搅拌筒、进料斗和主辅卸料槽不应有明显的混凝土积块。
  3. There should be no obvious concrete block in mixing drum, feeding hopper and main and auxiliary discharge tank.
                全自动上料搅拌车
  二、液压系统检查规则
  2、 Hydraulic system inspection rules
  1、取力器工作时,应结合平稳,压力应达到设计的额定要求,不应渗漏。
  1. When the power take-off works, it should be combined smoothly, and the pressure should meet the rated requirements of the design, and there should be no leakage.
  2、液压系统零部件应齐全完好,系统工作压力应符合说明书要求。
  2. The hydraulic system parts should be complete and in good condition, and the working pressure of the system should meet the requirements of the manual.
  3、液压油型号、油质、油量及使用应符合有关规定;散热泵工作时油温不应超过80℃;管路连接应可靠;不应锈蚀、变形、老化、破损、渗油。
  3. The model, quality, quantity and use of hydraulic oil shall comply with relevant regulations; the oil temperature of heat dissipation pump shall not exceed 80 ℃; pipeline connection shall be reliable; corrosion, deformation, aging, damage and oil leakage shall not be allowed.
  4、各液压操纵部分运动应灵活、连接可靠。
  4. The movement of each hydraulic control part should be flexible and reliable.
  三、供水系统检查规则
  3、 Inspection rules of water supply system供水系统水泵及部件应齐全完整,不应泄漏。
  The water pump and parts of the water supply system shall be complete and complete without leakage.
  四、安全装置检查规则
  4、 Safety device inspection rules
  1、液压系统中应设有防止过载和液压冲击的安全装置;安全溢流阀的调整压力不得大于液压泵的额定压力。
  1. The hydraulic system shall be equipped with safety device to prevent overload and hydraulic impact; the adjustment pressure of safety relief valve shall not be greater than the rated pressure of hydraulic pump.
  2、小型混凝土搅拌车侧面、后部的防护装置应齐全、完好。
  2. The side and rear protective devices of small concrete mixer truck shall be complete and intact.
  3、小型混凝土搅拌车应配备灭火器材。
  3. Small concrete mixer shall be equipped with fire fighting equipment.
  严格的规范是安全使用小型混凝土搅拌车的重要工作,希望大家能够按照上面的检查规定对车辆进行检查。
  Strict specification is an important work for the safe use of small concrete mixer. I hope you can check the vehicle according to the above inspection regulations.
 

 

首页 产品 电话 置顶
Baidu
sogou