自动上料搅拌车柔性正确操作方法可以归纳为：一轻、二稳、三离、四勤、五协调、六严禁。
The flexible and correct operation methods of automatic feeding mixer can be summarized as: one light, two stable, three separation, four diligence, five coordination and six prohibition.
一轻：在自动上料搅拌车作业时脚跟紧抵驾驶室地板，脚板和油门踏板保持平行，轻缓地下压加油踏板。
One light: in the operation of the automatic feeding mixer, the heel is close to the floor of the cab, the foot board and the accelerator pedal are parallel, and the refueling pedal is pressed gently.
二稳：自动上料搅拌车在作业中，油门始终要稳住。一般作业状态下，油门开度在70%左右为宜。
Two stable: automatic feeding mixer in the operation, the throttle should always be stable. In general operation, the throttle opening should be about 70%.
三离：在自动上料搅拌车作业时，脚板应和制动踏板分离开，平放到驾驶室地板上，决不能踩在制动踏板上。自动上料搅拌车常常在凹凸不平的工地作业，如果脚总是踩在制动踏板上，机身上下窜动会造成驾驶员不轻意地踩制动踏板。一般情况下，要用控制油门减速的办法控制机况和换挡。这样既避免了频繁制动造成制动系统过热，又为自动上料搅拌车快捷的提速带来方便。
Three separation: during the operation of the automatic feeding mixer, the foot plate should be separated from the brake pedal, and placed flat on the floor of the cab. Never step on the brake pedal. Automatic feeding mixer often works on uneven construction site. If the foot is always on the brake pedal, the body will move up and down, which will cause the driver to step on the brake pedal carelessly. Under normal circumstances, to control the throttle deceleration method to control the machine condition and shift. In this way, the overheat of the braking system caused by frequent braking is avoided, and it is convenient for the quick speed-up of the automatic feeding mixer.
图片
picture
四勤：在自动上料搅拌车作业时，特别是在铲挖作业时，应在油门稳定情况下，用循环扳动起升和转斗操纵杆的方法使铲斗铲满物料。起升和转斗操纵杠的循环扳动就是所说的“勤”。这个过程非常重要，对耗油量的影响很大。
Four frequently: in the operation of automatic feeding mixer, especially in the digging operation, under the condition of stable throttle, the bucket shall be filled with materials by means of cyclic pulling the lifting and rotating bucket control lever. The cyclic pulling of lifting and rotating bucket control lever is called "diligence". This process is very important and has a great impact on fuel consumption.
五协调：协调就是起升和转斗操纵杠有机的配合。自动上料搅拌车一般的铲挖过程首先是将铲斗平放在地面，平稳地驶向料堆。在铲斗平行铲往料堆遇阻力时，首先应遵循先起臂后收斗的原则。这样可以有效地避免铲斗底部受到阻力，从而能够充分发挥的掘起力。
Five coordination: coordination is the organic coordination of lifting and rotary bucket control lever. The general digging process of automatic feeding mixer is to put the bucket flat on the ground and drive to the material pile smoothly. When the bucket is parallel to the material pile and meets resistance, the principle of lifting the arm first and then retracting the bucket should be followed. This can effectively avoid resistance at the bottom of the bucket, so as to give full play to the maximum digging force.
莱州聚峰机械专注行业经营多年，专注于
全自动上料搅拌车的生产及研究，欢迎大家点击我们的网站
进行咨询及了解，欢迎大家访问.
Laizhou Jufeng machinery focuses on the industry for many years, focusing on the production and research of automatic feeding mixer. Welcome to our website For consultation and understanding, welcome to visit
山汽官方微信
2022-12-23
首页
产品
电话
置顶