1、搅拌单元： 搅拌仓容量 3450立升，混凝土输出量2.5立米／次。 双螺旋结构。液压电机，行星齿轮传动。 正反转实现搅拌，卸料。搅拌筒300°回转，在车辆四周1.9米以上高度倾倒混凝土。
1. Mixing unit: the capacity of mixing bin is 3450l, and the concrete output is 2.5m3/time. Double helix structure. Hydraulic motor, planetary gear drive. Mixing and unloading are realized by forward and reverse rotation. The mixing drum rotates 300 ° and dumps concrete at a height of more than 1.9m around the vehicle.
2、发动机：珀金斯涡轮增压柴油机 1104 D-44 TA, 水冷式四缸，功率 62.5千瓦， 84马力。后置。
2. Engine: Perkins turbocharged diesel engine 1104 d-44 TA, water-cooled four cylinder, maximum power 62.5 kW, 84 HP. Post.
3、传动系统； 采用德国博士 力士乐液压元件。 发动机带动2套系统（4驱动行走和搅拌）工作。
3. Transmission system; German doctor Rexroth hydraulic components are adopted. The engine drives 2 sets of systems (4 drive walking and mixing) to work.
4、速度： 工作速度0－9公里/小时， 路上行走速度 0－25公里/小时。
4. Speed: the working speed is 0-9 km / h, and the walking speed on the road is 0-25 km / h.
5、驾驶席：前置具有Rops-Fops(防翻滚-防坠落)保护标准双开门司机室。
5. Driver's seat: front double door cab with international ROPS FOPS (anti roll - anti fall) protection standard.
6、液压系统： 3回路，2个可变输出泵 分别带动传动系统和 回转系统。2齿轮泵负责进出过滤系统，和水热油的热交换。
6. Hydraulic system: three circuits and two variable output pumps drive the transmission system and the rotation system respectively. 2 gear pump is responsible for the heat exchange with water and hot oil in and out of the filtration system.
7、操纵杆： 料斗的所有液压控制动作由一个操纵杆完成。
7. Control lever: all hydraulic control actions of the hopper are completed by one control lever.
8、计量： 电子称重单元为可选部件，具有司机室输出打印功能。
8. Metering: the electronic weighing unit is an optional component and has the output printing function in the cab.
9、布料斗： 400立升带有液压控制闸门的料斗。
9. Distribution hopper: 400 liter hopper with hydraulic control gate.
10、出料滑道： 液压控制可回转.由2个销轴固定，易拆卸来增加卸料高度。
10. Discharge chute: it can rotate under hydraulic control. It is fixed by two pin shafts and easy to disassemble to increase the discharge height.
11、供水： 车载水供应系统，附带水表，高压水枪（可选件）
11. Water supply: vehicle mounted water supply system, with water meter and high-pressure water gun (optional)
12、可爬行坡度：满载时30％
12. Crawling slope: 30% at full load
13、制动系统： 油浴式盘式制动器。双轴不同回路控制。 负液压停车制动系统
13. Brake system: oil bath disc brake. Dual axis different loop control. Negative hydraulic parking brake system
14、轮胎：工程工业用胎12.5-20 PR 12.
14. Tire: engineering industrial tire 12.5-20 PR 12
15、转向系统： 静流体液压 3向转向，回转半径内部 1500mm 外部3500mm
15. Steering system: hydrostatic 3-way steering, with a turning radius of 1500mm inside and 3500mm outside
16、电力系统： 12V 120 Ah 电池提供路上照明和发动机启动，紧急制动
16. Power system: 12V 120 ah battery provides road lighting, engine start and emergency braking
17、油，水箱：水 2×270立升 ， 柴油 105立升，液压油 80立升。
17. Oil, water tank: water 2 × 270 litres, 105 litres of diesel, 80 litres of hydraulic oil.
18、底盘： 满足工程需要特制钢质底盘
18. Chassis: special steel chassis to meet the needs of the project
19、重量：6100公斤 均匀分布在2轴上。
19. Weight: 6100kg, evenly distributed on 2 axes.
20、安全规范：本机械配备自动检测和满载自动锁死阀门系统。如铲臂工作时，可自动控制搅拌筒旋转。
20. Safety specification: This machine is equipped with automatic detection and full load automatic locking valve system. If the shovel arm works, it can automatically control the rotation of the mixing drum.
山汽官方微信
2022-12-23
首页
产品
电话
置顶