新2手机会员端网址(中国)责任有限公司

新2手机会员端网址
热线电话:400-879-1999 山汽官方微信
郑重声明 购机 售后
在线询价
热线电话:400-879-1999
您现在所在的位置: 首页> 新闻资讯 > 行业新闻

自上料水泥搅拌机搅拌筒内壁上设置功能

所属分类:行业新闻 发布时间:2022-05-16 来源: 浏览量:0

自上料水泥搅拌机搅拌筒内壁上设置双螺旋形叶片,正向旋转为进料、混凝土搅拌;反向旋转,在螺旋叶片的推动下、混凝土由出料口出料。自上料水泥搅拌机操作规范介绍如下:
Double spiral blades are set on the inner wall of the mixing drum of the feeding cement mixer, which rotate in the positive direction for feeding and concrete mixing; In reverse rotation, the concrete is discharged from the discharge port under the push of the spiral blade. The operation specification of self feeding cement mixer is introduced as follows:
1、在施工现场卸料完毕后,应立即用自上料水泥搅拌机随带的软管冲洗进料斗、出料斗、卸料溜槽等处,清理干净粘附在车身各处的污泥及混凝土。在返回搅拌站的途中,应向搅拌筒内注150---200L水以清洗筒壁及叶片粘结的混凝土残渣。
1. After unloading at the construction site, immediately flush the feed hopper, discharge hopper, discharge chute, etc. with the hose attached to the feeding cement mixer, and clean up the sludge and concrete adhered to the vehicle body. On the way back to the mixing plant, 150-200l water shall be injected into the mixing drum to clean the concrete residue bonded to the drum wall and blades.
2、每天工作结束后,司机应负责向搅拌筒内注入清水并高速(14—18转/分)旋转5—10分钟,然后将水排去,以保障筒内清洁。用高压水清洗搅拌筒各个部分时,应注意避开仪表及操纵杆等部位。压力水喷嘴与车身油漆表面间的距离不得小于40厘米。
2. At the end of each day's work, the driver shall be responsible for injecting clean water into the mixing drum and rotating at high speed (14-18 RPM) for 5-10 minutes, and then draining the water to ensure the cleanness of the drum. When cleaning all parts of the mixing drum with high-pressure water, pay attention to avoid instruments, control rods and other parts. The distance between the pressure water nozzle and the paint surface of the vehicle body shall not be less than 40cm.
3、清理干净搅拌筒内外积污及残存的混凝土渣块时,以及在机修人员进入筒内进行检修和焊补作业时,需先关闭自上料水泥搅拌机发动机,使搅拌筒完全停止转动。在机修人员进入筒内工作期间,应该保障拌筒内通风良好,空气新鲜,无可然气体及有害灰尘,氧气供应充足。在筒内使用电动工具操作时,操作人员应该有良好的绝缘保护。
3. When cleaning the accumulated dirt and residual concrete residue inside and outside the mixing drum, and when the mechanical maintenance personnel enter the drum for maintenance and welding repair, it is necessary to turn off the self feeding cement mixer engine first to stop the mixing drum completely. During the period when the mechanical maintenance personnel enter the drum for work, they should ensure that the mixing drum has good ventilation, fresh air, no combustible gas and harmful dust, and sufficient oxygen supply. When using electric tools in the cylinder, the operator should have good insulation protection.
4、工作时,不得将手伸入旋转的搅拌筒内,严禁将手伸入主卸料溜槽和加长卸料溜槽的连接部位自动,工作人员如何规范操作自上料水泥搅拌机以免发生事故。
4. When working, do not put your hand into the rotating mixing drum. It is strictly prohibited to put your hand into the connecting part of the main discharge chute and the extended discharge chute. How to standardize the operation of the self feeding cement mixer to avoid accidents.
本文的精彩内容由全自动上料搅拌车提供知识提供,本网站还有很多的精彩内容,更多的内容您可以点击进入:/我们有专门的客服为您解答问题
The wonderful content of this article is provided by the knowledge of automatic feeding mixer. There are many wonderful contents on this website. You can click to enter more contents: / We have special customer service to answer your questions

 

首页 产品 电话 置顶
Baidu
sogou