自上料搅拌车，操作简单出料迅速，优势更明显！
Since the loading mixer, the operation is simple and the discharging is fast, the advantage is more obvious!
自上料水泥搅拌车广泛适用于住宅建筑、乡村修路、修建广场、车间……等路面比较窄的硬化施工作业的专用车辆。该产品具有自上料、自供水、自搅拌，270度左旋右转全地形大角度下料，高压自动冲洗罐体，多功能为一体的工程搅拌车。
Self loading cement mixer is widely used in residential buildings, rural road construction, building squares, workshops... And other special vehicles for hardening construction with narrow roads. This product has a multi-function engineering mixer with self loading, self water supply, self mixing, 270 ° left rotation and right rotation, all terrain large angle unloading, high-pressure automatic tank washing.
自上料搅拌车优势
Advantages of self loading mixer
一、操作灵活方便，时间继电器加水使搅拌更均匀，更符合标准。操作杆操作方便。
1、 The operation is flexible and convenient. The time relay adds water to make the mixing more uniform and more in line with the standard. The operating lever is easy to operate.
二、前置双轮真空钢丝轮胎承重更大，减少意外的发生。
2、 The front double wheel vacuum steel wire tire has greater load-bearing and reduces accidents.
三、高压洗车枪，清洗车辆更干净！方便快捷，出料的时候能够非常的方便清洗。不需要人工手动清洗。
3、 High pressure car washing gun makes the car cleaner! It is convenient and fast, and it is very convenient to clean when discharging. Manual cleaning is not required.
四、每天工作要少省10个人工，节约100度电，不用混泥土运输车和装载机上料，全地形工作。
4、 Work every day to save 10 labor, save 100 degrees of electricity, no concrete truck and loader loading, all terrain work.
五、驾驶室操作台可旋转，前后双向驾驶更方便。车辆可倾斜式卸料功能，使卸料更干净，速度更快，倾斜式卸料设计让车辆卸料更加贴合实际。
5、 The cab console can be rotated, which makes it more convenient to drive in both directions. The tilting unloading function of the vehicle makes the unloading cleaner and faster. The tilting unloading design makes the unloading of the vehicle more practical.
自动上料搅拌车使用前应做到
The automatic feeding mixer shall meet the following requirements before use
1、检查各个水箱是否缺水并加足水，轮胎气压是否符合2.5bar以_上要求。
1. Check whether each water tank is short of water and add enough water, and whether the tire pressure meets 2.5bar_ Requirements.
2、检查发动机机油油尺，液压油箱标尺，齿轮箱油标观察孔，前、后桥，轮边减速轴头拧开油面油堵检查齿轮油是否符合要求，缺少应及时添加，总泵自动液油杯液面是否合乎标准要求。
2. Check the engine oil dipstick, hydraulic oil tank dipstick, gearbox oil gauge observation hole, front and rear axles, wheel reduction shaft head, unscrew the oil level oil plug, and check whether the gear oil meets the requirements. If it is missing, it should be added in time, and whether the liquid level of the master cylinder automatic oil cup meets the standard requirements.
3、观测发动机机油，齿轮油，检查油标尺，油标锣孔，液压油箱时，车辆要水平位置。
3. Observe the engine oil and gear oil, and check the oil dipstick, the Gong hole of the oil pointer, and the hydraulic oil tank. The vehicle should be in a horizontal position.
4、全车各部油管路，气管路接头是松动有无漏油，漏气现象。检查全车线路有无接触不良，各仪表，灯光是否工作正常。
4. The oil pipeline and gas pipeline joints of all parts of the vehicle are loose, and whether there is oil leakage or air leakage. Check whether the circuit of the whole vehicle has poor contact and whether the instruments and lights work normally.
5、行驶前刹车是否制动有效，检查各操纵阀作用是否良好。
5. Check whether the brake is effective before driving and whether the control valves work well.
以上就是为
自动上料搅拌车大家介绍的内容，感谢您在百忙之中查看我公司的信息内容，如果您想要了解的更多，欢迎您来电进行咨询!
/The above is the content introduced for the automatic feeding mixer truck. Thank you for checking the information of our company in your busy schedule. If you want to know more, you are welcome to call for consultation! /
山汽官方微信
2022-12-23
首页
产品
电话
置顶