从全自动上料搅拌车在日常使用的时候会发现罐体越来越小了,不好清洗材料的原因是卡在槽壁,接下来想为大家介绍的是自上料搅拌车防止粘罐的方法。
From the daily use of the full-automatic feeding mixer, it will be found that the tank body is getting smaller and smaller. The reason for the bad cleaning materials is that they are stuck in the tank wall. Next, I want to introduce the method to prevent the tank sticking of the self feeding mixer.
1. 随身携带减水剂
1. Carry water reducing agent with you
减水剂是一种能在保持混凝土坍落度恒定的条件下降低搅拌用水量的混凝土外加剂。但是，在添加减水剂时，一定要记得有商业混凝土站实验室的存在，否则混凝土质量强度不够，司机要承担后果。
Water reducing agent is a kind of concrete admixture which can reduce the mixing water consumption under the condition of keeping the concrete slump constant. However, when adding water reducing agent, it is necessary to remember the existence of commercial concrete station laboratory, otherwise the concrete quality and strength are not enough, and the driver shall bear the consequences.
2. 检查水箱里的水量
2. Check the water volume in the water tank
每次你完成下车任务返回车站时，都要检查一下水箱里的水。确保水箱里的水在任何时候都是满的，以备雨天之需。
Every time you get off the train and return to the station, check the water in the water tank. Make sure that the water tank is full at all times for rainy days.
3.离开工厂前检查一下混凝土的质量
3. Check the quality of concrete before leaving the factory
混凝土的质量可能因板材而异，这取决于材料。在加载混凝土离开现场时，要检查罐内混凝土的坍塌程度和搬运的方便性，小心混凝土的早期凝结和混凝土分层沉淀。
The quality of concrete may vary from plate to plate, depending on the material. When the loaded concrete leaves the site, it is necessary to check the collapse degree of the concrete in the tank and the convenience of handling, and be careful of the early setting of the concrete and the layered sedimentation of the concrete.
4. 减少车辆行驶时间
4. Reduce vehicle driving time
混凝土运输距离一般在直径30公里以内，根据车辆规划路线和车辆通行情况，尽量减少车辆在道路上行驶的时间。
The concrete transportation distance is generally within 30km in diameter. According to the vehicle planning route and vehicle traffic conditions, the vehicle driving time on the road shall be minimized.
5. 减少损耗，先排出物料
5. Reduce losses and discharge materials first
如果遇到人为因素或不可抗拒的因素，导致长时间无法卸货的情况，应随时检查罐内混凝土情况，一旦发现混凝土开始凝结。卸货后立即向负责人报告，以防止整个罐内被报废。
In case of artificial or irresistible factors that make it impossible to unload for a long time, the concrete in the tank shall be checked at any time. Once it is found that the concrete starts to set. Report to the person in charge immediately after unloading to prevent the whole tank from being scrapped.
以上就是
全自动上料搅拌车防止粘罐的方法，我们可以学习后在很大程度上避免这个问题，可以提高自己的工作效率，减少材料的损失。
The above is the method to prevent the tank sticking of the full-automatic feeding mixer. We can avoid this problem to a large extent after learning, improve our work efficiency and reduce the loss of materials.
山汽官方微信
2022-12-23
首页
产品
电话
置顶