与其他配件相比，轮胎可谓是全自动上料搅拌车所有部件中较易磨损且磨损程度较严重的一个。因轮胎的性能状态会直接影响到自动上料搅拌车的正常使用和运行的综合效益，所以，一旦轮胎出现破损的问题就需要及时进行维修。下面就由我司技术人员来给大家简单讲解下全自动上料搅拌车轮胎破损时的正确处理办法。

　　Compared with other accessories, the tire can be said to be one of the most easily worn and seriously worn parts of the automatic charging mixer. Because the performance of the tire will directly affect the normal use and comprehensive benefits of the operation of the full-automatic charging mixer, once the tire is damaged, it needs to be repaired in time. The following is my company's technical personnel to give you a simple explanation under the full-automatic feeding mixer tire damage when the correct treatment.

　　通常来说，自动上料搅拌车承重较多，并且路况大都都很差，简单发生轮胎被路上异物、尖利物品割伤划伤的表象，高温时作业对于混凝土搅拌车轮胎而言也是一大检测，下降其运用寿命不说，爆胎也时有发生。如今轮胎都比较贵，若是仅仅一个很小的裂口的话，能够修正，能省不少钱，不过若是是裂缝较大而为了安全思考的话，较佳仍是换新胎。那么，修补师傅是如何解答的呢？

　　In terms of high temperature, it is easy to say that when the tire is scratched by high temperature, it is easy to say that when the tire is scratched by high temperature, it is not easy to say that when the tire is scratched by high temperature. Nowadays, tires are more expensive. If there is only a small crack, it can be corrected and a lot of money can be saved. However, if there is a big crack and for the sake of safety, it is better to replace it with a new one. So, how does the mender answer it?
              

　　关于修补工来说，若是修补没有经验，都是先用废旧轮胎做试补，修补自动上料搅拌车轮胎时常常查看补胎机温度是不是正常，气囊压力是不是正常。运用打磨机时须带上防护眼镜；打磨时握紧打磨机轻打避免反弹。下面是自动上料搅拌车补轮胎的详细步骤，我们能够参阅一下：

　　As for the repairman, if he has no experience in repairing for the first time, he will first use the waste tire for trial repair. When repairing the full-automatic charging mixer tire, he often checks whether the tire repair machine temperature is normal and whether the air bag pressure is normal. Wear protective glasses when using the grinder; hold the grinder tightly and hit gently to avoid rebound. The following is the detailed steps of tire repair for the full-automatic feeding mixer, which we can refer to:

　　先涂刷胶水，等胶水阴干，胎内贴上橡胶及帘子布，然后压实压紧，谨防空气夹入，接下来选用与轮胎巨细共同的补胎气囊，轮胎外侧创伤有必要缝合，缝合后填充补胎生胶。要注意一点的是，补胎生胶填充高于胎面有些2-3毫米。下面是用扩胎器将轮胎阔开，将气囊装入编制带或涂改滑石粉后，装入轮胎，放入上模，并在上模与下模加放铁皮，在气囊上方放入橡胶板(便宜)，然后放入维护气囊的铁板，放入压铁，装好丝杠。旋紧两头丝杠，将轮胎赶紧。要尽量保障轮胎与模具严密贴合，如不贴合，请松开丝杠及压铁，从头调整。较终将硫化出的剩余橡胶割掉，保障自动上料搅拌车胎面平坦。

　　First, brush glue, wait for glue to dry in the shade, paste rubber and cord fabric inside the tire, and then compact and compact it to avoid air entrapment. Next, use the tire repair air bag which is the same as the tire size. It is necessary to suture the external trauma of the tire, and fill the tire with raw rubber after stitching. It should be noted that the raw rubber filling is 2-3 mm higher than the tread. The next step is to use the tire expander to open the tire. After the airbag is loaded into the braided belt or coated with talcum powder, the tire is loaded into the upper mold, and the iron sheet is placed in the center of the upper mold and the lower mold, and the rubber plate is placed above the air bag (cheap), and then the iron plate for maintaining the air bag is put in, and the lead screw is installed. Tighten the two lead screws, and make the tire quickly. Try to ensure that the tire fits tightly with the mold. If it does not fit, please loosen the lead screw and iron and adjust from the beginning. Finally, the remaining vulcanized rubber is cut off to ensure the smooth tread of automatic feeding mixer.

　　总之，对于全自动上料搅拌车车辆轮胎，我们不仅需要明确轮胎磨损出现的原因，更重要的是要结合实际生产情况选择合适的措施进行管理，并在轮胎出现严重损坏时正确加以维修，以争取不断降低各因素对轮胎造成的影响，进而提高车辆运行的效率。

　　In a word, for the tires of full-automatic charging mixer, we not only need to clarify the causes of tire wear, but also select appropriate measures to manage them according to the actual production situation, and properly repair the tires when they are seriously damaged, so as to continuously reduce the impact of various factors on the tires, and then improve the efficiency of vehicle operation.