自动上料搅拌机无法正常启动的原因有哪些呢?
What are the reasons why the self feeding mixer cannot start normally?
一、如果在启动时只听到启动机电磁开关发出“咯咯”声,但曲轴却不转动,有可能是蓄电池“断格”造成的。
1、 If you only hear the electromagnetic switch of the starter "cluck" when starting, but the crankshaft does not rotate, it may be caused by the "broken grid" of the battery.
二、如果极桩、极桩夹子接触不良而发热烧损,这时启动移动式自动上料搅拌机就会出现突然转动无力,并伴有烧橡胶气味或蓄电池处冒烟现象。
2、 If the pole post and pole post clamp are not in good contact with each other and burn out, the mobile automatic feeding mixer will suddenly turn powerless, accompanied by burning rubber smell or smoke from the battery.
三、如果启动时只有轻微“嗒”的一声,之后就再没有任何反应时,就可以是启动继电器发卡出了问题。
3、 If there is only a slight "click" sound when starting, and there is no reaction after that, it can be that the starting relay is jammed.
四、当飞轮齿圈的啮合切入面变形的时候,就会出现启动时启动机驱动齿轮与发动机飞轮齿圈会发出撞击的空转声。
4、 When the meshing cut-in surface of flywheel ring gear is deformed, the idling sound of collision between the driving gear of starter and flywheel ring gear of engine will appear.
五、当启动机电磁开关的保持线圈错接在了电源接线柱上或钥匙开关上的3根线接错时,电源总开关一接通搅拌,
自动上料搅拌机无法正常启动的原因就会出现启动机驱动齿轮就和飞轮齿圈啮合在一起转动的现象。
5、 When the holding coil of the electromagnetic switch of the starter is wrongly connected to the power terminal or the three wires on the key switch are wrongly connected, as soon as the main switch of the power supply is connected to the mixing, the reason why the charging mixer can not be started normally will appear that the driving gear of the starter and the flywheel ring gear will rotate together.
以上是关于自动上料搅拌机无法正常启动的原因分析,希望对你们有帮助,想要了解更多相关内容欢迎点击
官方网站首页。
The above is about the reason why the charging mixer cannot start normally. I hope it will help you. If you want to know more about it, please click here Home page of the official website.