排查搅拌车制动器的异常要注意什么?
What should we pay attention to when checking the abnormality of mixer truck brake?
1.搅拌车制动时发出异常声音;踩刹车时,刹车系统会产生剧烈的金属摩擦。
1. The mixer makes abnormal sound when braking; When you step on the brake, the brake system will produce severe metal friction.
这可能是由于刹车片中的异物,刹车盘上的锈蚀等引起的。
This may be caused by foreign matters in the brake pad and corrosion on the brake disc.
2.搅拌车刹车踏板行程变长;刹车松开时,您会看到一个直的白点。
2. The brake pedal stroke of the mixer truck becomes longer; When the brake is released, you will see a straight white dot.
较长的制动行程的原因主要是由于空气进入制动系统,缺少制动油,可能的泄漏以及制动衬块的严重磨损。
The reason for the long braking stroke is mainly due to the air entering the braking system, lack of brake oil, possible leakage and serious wear of brake pads.
3.搅拌车制动偏差;制动偏差不是很常见,主要反映了在施加制动时方向盘偏向一侧的事实。
3. Braking deviation of mixer truck; Braking deviation is not very common, which mainly reflects the fact that the steering wheel is biased to one side when braking is applied.
这种现象的原因可能是制动衬块的偏心磨损和制动缸的问题。
This phenomenon may be caused by eccentric wear of brake pads and problems of brake cylinders.
4.搅拌车刹车越来越难;许多卡都有增加刹车的问题。加强制动器的主要原因是真空助力器的故障。没有辅助制动,经常使用制动。
4. It is more and more difficult to brake the mixer truck; There are many problems with the increase of brake cards. The main reason for strengthening the brake is the failure of the vacuum booster. There is no auxiliary braking, and the braking is often used.
5.搅拌车刹车的反;许多卡伙伴都遇到了这种情况,但是在应用制动器时,会出现上肢弹回制动踏板的现象,这主要是由于制动盘表面不平整所致。垫片和钢圈变形。
5. Anti braking of mixer truck; Many card partners encounter this situation, but when applying the brake, the upper limb will bounce back to the brake pedal, which is mainly due to the uneven surface of the brake disc. The gasket and steel ring are deformed.
以上就是为大家介绍的有关
自动上料搅拌车的详细介绍,希望对您有所帮助.如果您有什么疑问的话,欢迎联系我们.我们将以的态度,为您提供服务
/
The above is a detailed introduction to the automatic feeding mixer truck. I hope it will be helpful to you If you have any questions, please contact us We will provide you with professional service /