新2最新管理手机网址是目前建筑行业常用的一种车辆,这种车辆在出车前和出车后行驶是要注意的一些问题。
The fully automatic feeding mixer is a kind of vehicle commonly used in the construction industry at present. Some problems should be paid attention to before and after the vehicle is driven.
一、离车前检查内容:
1、 Inspection content before departure:
1.遵守交通法规,不要酒后驾车。
1. Obey the traffic laws and regulations. Don't drink and drive.
2.检查驾驶证、驾驶证及部分文件是否完整。
2. Check whether the driver's license, driver's license and some documents are complete.
3.检查发动机、机油、柴油、水、电池液是否充足。
3. Check whether the engine, engine oil, diesel oil, water and battery fluid are sufficient.
4.检查液压油和滚筒功率是否正常。
4. Check whether the hydraulic oil and drum power are normal.
5.检查轮胎气压及钢板螺丝有无松动。
5. Check whether the tire pressure and steel plate screws are loose.
6.检查照明仪表、喇叭、气压、转向机构、脚刹、手刹是否有效。
6. Check whether the lighting instrument, horn, air pressure, steering mechanism, foot brake and hand brake are safe and effective.
7.泵车进入场地后,先观察地形。稳定的泵场必须平整坚硬,没有障碍物和高压电线,油罐车容易接近。抬起手臂时,确保腿稳固可靠。
7. After the pump truck enters the site, observe the terrain first. The stable pump field must be flat and hard, free of obstacles and high-voltage wires, and easy to access by tank trucks. When lifting the arms, make sure the legs are secure.
二、收车后检查内容:
2、 Inspection content after receiving:
1.清洗车身及滚筒杂物。
1. Clean the body and roller sundries.
2.清洗电池和驾驶室。
2. Clean the battery and cab.
3.松开油箱的水,拉刹车,锁车门。
3. Release the water in the oil tank, pull the brake and lock the door.
4.加汽油和柴油,准备下一轮班。
4. Add gasoline and diesel to prepare for the next shift.
5.当泵车完成或需要转移时,应先将吊臂有序折叠,放在托架上,并将腿完全收回锁紧。
5. When the pump truck is completed or needs to be transferred, the boom shall be folded orderly, placed on the bracket, and the leg shall be fully retracted and locked.
新2最新管理手机网址在司机开车前一定不要喝,这是为了自己的,也是为了别人的。
The fully automatic feeding mixer must not be drunk before the driver drives. This is for his own safety and the safety of others.
以上是
新2最新管理手机网址厂家小编为大家介绍的出车前后注意事项,想要了解更多搅拌机产品信息,欢迎访问网站:
The above is the precautions before and after the car is put out for you. If you want to know more about the mixer products, please visit the website: